Fire resistant duct enclosures
Fire resistant duct enclosures :
When it comes to construction and engineering, ensuring safety is crucial, and this includes fire protection. It is essential to protect gas pipes, medical fluids, various conduits, and electrical cable trays. Fire protection enclosures meet this challenge, as they can be installed on 2, 3, or 4 sides depending on the needs of the site, thus ensuring appropriate and optimal protection.
Current standards :
EN 1366-5 / EN 13501-2 FIRE RESISTANT DUCT ENCLOSURES/ EIS
Solutions for technical duct enclosures
GEOSTAFF offers great flexibility in its fire-resistant enclosure solutions, thanks to the use of:
- GEOTEC®S boards: These boards, used for GEOTEC® ventilation and smoke extraction ducts, can also be used for fire-rated duct cladding. They offer exceptional fire resistance and proven durability and can also be used for specific applications such as the protection of carbon fiber plates.
- GEOFLAM® N boards: The new generation of fire-resistant boards, set to replace the GEOFLAM® LIGHT range. Lighter (20% less), easier to cut and install, they feature an innovative system of rebates and tongues for optimized assembly. Designed to meet the most stringent health, environmental, and safety requirements, they offer a modern and sustainable solution for encasing technical ducts.
- GEOFLAM®FX 50: like GEOFLAM® ventilation and smoke extraction ducts, these boards are the ideal choice for fire protection enclosures, especially in high-risk fire environments.
- GEOFLAM® C – Light channels: are ideal for cross-sections up to 350 x 200 mm.
These fire-resistants channels are pre-molded elements made from a sophisticated combination of gypsum and fiberglass, representing the ultimate in passive fire protection. Each component has been selected for its unique properties, guaranteeing maximum resistance to fire. Their light weight and ease of installation make them ideal for encasing fire-resistant shafts.
Versatile functionality
Our GEOFLAM® C Light fire resistant channels are open U-shaped modules, making them extremely versatile. They are ideally suited to enclosing technical ducts, whether for gas pipes, medical fluids, various pipes or electrical cable trays. What’s more, they can withstand exposure to fire for an impressive 2 hours (EI 120).
Simple installation and a wide range of applications
In addition to their safety performance, GEOFLAM® C Light fire resistant channels are designed for quick and easy installation. Thanks to the dedicated cover, the elements can be closed with ease, and their glued assembly greatly facilitates the process, reducing labor costs and installation time.
Thanks to their design and strength, GEOFLAM® C Light channels are suitable for a multitude of environments: hospitals, hotels, high-rise buildings, office blocks, residences and many more. Their adaptability makes them the ideal solution for any project requiring high-quality passive fire protection.
Environmental commitment
Gypsum, the main component of GEOFLAM® C Light channels, combines durability with respect for the environment. By adopting this solution, you are choosing an eco-responsible material, while ensuring optimum protection for your structure..
To find out more about our Corporate Social Responsibility (CSR) commitments, click here.
Fire protection solution using fire-resistant boards :
GEOTEC® S range :
| ENCLOSURES WITH FIRE RESISTANT BOARDS |
INSTALLATION METHOD GLUE + … |
|
|---|---|---|
| MINIMUM SECTION (MM) | MAXIMUM SECTION (MM) | |
| Screws | 50 x 50 | 2500 x 1500 |
| Staples* | 1250 x 1000 | |
| Polochonnage | 2500 x 2000 |
GEOFLAM® N range :
| ENCLOSURES WITH BOARDS |
MÉTHODE DE POSE | |
|---|---|---|
| MINIMUM SECTION (MM) | MAXIMUM SECTION (MM) | |
| Polochonnage | 50 x 50 | 1250 x 1000 |
GEOFLAM® FX range :
| ENCLOSURES WITH BOARDS |
MÉTHODE DE POSE | |
|---|---|---|
| MINIMUM SECTION (MM) | MAXIMUM SECTION (MM) | |
| Polochonnage | 50 x 50 | 2500 x 2000 |
Fire protection solution for enclosures using fire protection channels :
GEOFLAM® C-light channels range :
| Enclosures for technical ducts using channels | Installation method – glue only or glue + polochonnage** |
|---|---|
| SECTION MINIMUM (MM) | SECTION MAXIMUM (MM) |
| 50 x 50 | 350 x 200 |
Technical catalogs
Product technical data sheets
GEOFLAM® N boards
2-hr. fire protective board 35 mm thick and with dimensions from 200 to 1300 (W) x 1000 (L) mm (in steps of 50 mm). Board with 2 rabbets and 2 tabs on each side
GEOFLAM® G intumescent ventilation grids
GEOFLAM ® G ventilation grids can be installed in GEOFLAM ® horizontal and vertical ducts to prevent overheating of electrical cables, e.g. when protecting cable ducts.
GEOTEC® S30 boards
1 hr. fire protective board 30 mm thick and with dimensions from 200 to 1100 (W) x 1000 (L) mm (in steps of 50 mm).
GEOTEC® A 1/2 Shells
Pre-moulded elements with a length of 1 ml and diameters of 90 or 130 mm (hxW) to protect the threaded rods.
GEOTEC® A plaster-battens
Pre-moulded 45 mm thick elements of unique size 1 ml (W) x 45 mm (L), used to facilitate the screwing of the boards to each other.
GEOTEC® A reinforcement-collars
Pre-moulded elements 30 / 45 mm thick, unique dimension 1 ml (W) x 200 mm (H), for supporting vertical systems.
PREFAB C-LIGHT gutter
Pre-moulded 35 mm thick elements, designed for a fire exposure time of up to 2 hours, intended for passive fire protection.
GEOTEC® A cover-strips
Pre-moulded elements of 20 mm thickness and unique dimension 1 ml (W) x 120 mm (L) used for the reinforcement of horizontal systems.
GEOTEC® A expansion-Joint
Pre-moulded elements measuring 10.5 ml (W) x 200 mm (L) serving as a presser for the insertion of foam and intumescent gaskets.
GEOTEC® SX30 boards
1 hr. fire protective board, thickness 30 mm and unique dimension 1200 (W) x 1000 (L) mm.
GEOTEC® A U-plaster
Pre-moulded elements of variable dimensions for the protection of the metal supports of horizontal ducts.
GEOTEC® SX45 boards
2-hr. fire protective board 45 mm thick and unique dimension 1200 (W) x 1000 (L) mm for passive fire protection
GEOFLAM® F LIGHT boards
2-hr. fire protective board 35 mm thick and with dimensions from 200 to 1100 (W) x 1000 (L) mm (in steps of 50 mm).
GEOFLAM® FX50 boards
3-hr. fire protective board 50 mm thick and single dimension 1000 (W) x 900 (L) mm for passive fire protection.
Product technical
data sheets
Digital tools
Geopro Calculation tool
BIM REVIT
Prescription
documents
Brochures and flyers
Brochure - Cas de montage encoffrement GEOFLAM C LIGHT non protection des tiges - CANIVEAUX
Télécharger plaquetteBROCHURE ENCOFFREMENTS COUPE FEU
Télécharger plaquettePlaquette entreprise A4
Télécharger plaquettePhotos and site returns
